Glitter Heat Transfer Craft Vinyl TW | Greens Yellows Oranges | 10" x 12" Sheet

Glitter Heat Transfer Craft Vinyl TW | Greens Yellows Oranges | 10" x 12" Sheet

• Compatible with Craft Cutters, Die Cutters, Sign Plotters, etc.
• Mirror/Reverse your image design.
• Place vinyl face down onto cutting mat .
• Adjust proper blade speed and cutting pressure .
• Weed all of the excess slowly, leave the delicate design letters or graphics.
• Make sure the finished product is facing the right way once ironed onto your fabric.
• Lay out the fabric and place the t-shirt or fabric on a hard, flat,  clean and dry surface.
• Place a cardboard to protect transferred image onto both sides of t-shirt.
• Set a heat press machine or iron to 150℃(302℉) to 160℃(320℉) .
• Press it only for 8-12 seconds at medium pressure.
• Iron on the clear glossy side. Do not use steam iron.
• Iron evenly. Be sure to consistently apply pressure so the complete image is fully attached and to prevent scorching the paper and cracking the image.
• *** Wait for the vinyl to completely COOL and gently peel off the backing after few minutes***

**A test cut is always recommended**

Please also note that colors appear slightly different on computer monitors.

If you purchase more than one sheet of the same color, it may or may not be a continuous piece.